Low Peak Roof Canopy Parts Kit 1" Diameter

Regular price $74.87

Free Shipping!

Low Peak Roof Canopy Parts Kit (1" Diameter)

 

Pictures are used just for reference. We will ship exactly the kit that you order.


Note: All 20' wide Canopy Kits in 1" Low Peak have center leg fittings for structural support.


This Canopy Parts Kit includes FITTINGS only. The conduit frame piping is NOT included. Frame piping must be purchased separately. The main framework poles (Electrical Metallic Tubing - EMT) are sold in standardized 10' lengths at any major hardware store.

 

Canopy fittings may vary in color being silver and/or gold mixed due to inventory availability.

 

To build your canopy taller/wider than 10' (join two EMT conduit pieces together), use union coupler connectors identified as part FC, found in the menu under “Canopy Fittings”.

 

All kits are listed in 10' increments but keep in mind that many variations of canopy sizes are possible using the same parts. There are many other denominations of canopy sizes you can consider.

 

Bar Braces to reinforce corners and peaks are available for purchase if your structure needs added support and stability.


Protective structural coverings to consider are; polycarbonate panels, clear or colored tarps, canvas, vinyl, plastic film sheets, shade cloth, shade nets, chicken wire and corrugated metal, other. *Also sold separately.


Low Peak Roof Canopy Parts Kit (1" Diameter) comes complete with all roof fittings and is to be used with 1" EMT poles. Low Peak fittings are a 102 degree angle with a 2.5" rise per foot. Foot pad fittings and side wall fittings are available upgrade options.


Upgrade Options:

1. Foot Pads - For temporary, semi-permanent and permanent structures, Foot Pads provide stabilization and ground anchor points for your canopy structure. The base of each Foot Pad fitting has four pre-drilled holes. One in the center designed for rain water drainage and three on the perimeter allowing anchor nails or hardware of your choice to secure your structure to the ground.

2. Side Wall Fittings - Add either One or Two Side Walls. The Side Wall upgrade not only ties your canopy structure legs together for added horizontal strength, but will also provide an attachment point to fixate side covers.


Low Peak Roof Canopy is an excellent way to provide protection from sun and rain. For snow protection, a High Peak Roof is preferred.


Indications for a Low Peak Roof Canopy:

1. RV and boat carports are a main use of Low Peaks in areas without significant snowfall.

 2. Greenhouses to provide protection from all weather elements. Greenhouses can be customized with trellising for home gardens with limited space.

3. Vendor booths for arts/crafts shows, fairs, conventions, festivals, swap meets, flea markets, etc.

4. Shelter/Shade Structures for outdoor workshops, firewood, dog and kids' play areas, etc. 


Instructions for assembly are included with all Canopy Kits.


Below are the part quantities you will receive based on your custom order.


*Low Peak 10'x10' configurations come with 6 roof pieces with options of 4 foot pads, one side wall (2 fittings) or two side walls (4 fittings).

*Low Peak 10'x20' configurations come with 9 roof pieces with options of 6 foot pads, one side wall (3 fittings) or two side walls (6 fittings).

*Low Peak 10'x30' configurations come with 12 roof pieces with options of 8 foot pads, one side wall (4 fittings) or two side walls (8 fittings).

*Low Peak 10'x40' configurations come with 15 roof pieces with options of 10 foot pads, one side wall (5 fittings) or two side walls (10 fittings).

*Low Peak 10'x50' configurations come with 18 roof pieces with options of 12 foot pads, one side wall (6 fittings) or two side walls (12 fittings).

*Low Peak 20'x20' configurations come with 9 roof pieces with options of 9 foot pads, one side wall (3 fittings) or two side walls (6 fittings).

*Low Peak 20'x30' configurations come with 12 roof pieces with options of 12 foot pads, one side wall (4 fittings) or two side walls (8 fittings).

*Low Peak 20'x40' configurations come with 15 roof pieces with options of 15 foot pads, one side wall (5 fittings) or two side walls (10 fittings).

*Low Peak 20'x50' configurations come with 18 roof pieces with options of 18 foot pads, one side wall (6 fittings) or two side walls (12 fittings).

*Low Peak 20'x60' configurations come with 21 roof pieces with options of 21 foot pads, one side wall (7 fittings) or two side walls (14 fittings).

*Low Peak 20'x70' configurations come with 24 roof pieces with options of 24 foot pads, one side wall (8 fittings) or two side walls (16 fittings).

*Low Peak 20'x80' configurations come with 27 roof pieces with options of 27 foot pads, one side wall (9 fittings) or two side walls (18 fittings).

*Low Peak 20'x90' configurations come with 30 roof pieces with options of 30 foot pads, one side wall (10 fittings) or two side walls (20 fittings).

*Low Peak 20'x100' configurations come with 33 roof pieces with options of 33 foot pads, one side wall (11 fittings) or two side walls (22 fittings).